|Place of Origin:||Shanghai, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Clamping Force:||2080kN||Opening Stroke:||245mm|
|Power(W):||14.5kW||After-sales Service Provided:||Overseas Third-party Support Available|
|Capacity:||Save Much More Energy||Color:||Blue Or Red|
200T Nylon Cable Tie Machine
|INJECTION UNIT||Screw Diameter||mm||45||50||55|
|Screw L/D Ratio||L/D||22.2||20||18.2|
|CLAMPING UNIT||Clamp Tonnage||KN||2080|
|Space Between Tie Bars||mm||530*530|
|Pump motor Power||KW||18.7|
|Oil Tank Capacity||L||220|
• There is no extra energy consumption due to output volume changes according to load alteration.
• In the phase od holding pressure,servo motor lowers rotate speed and consumes a little of energies.
• In the phase of cooling,motor doesn’t work and consumes no energy.
• The noise is below 78bd.Servo motor has almost no noise huring no operation.
• No constant flow pump and speed set motor overflow heating.When the temperature of hydraulic oil is lower,the cooling water is reduced greatly.
According to different products,servo energy-saving injection molding machines will save 20%-80%energy and bring you prominent economic benefit.
Is equipped with high performance servo motor controlling system,the machine’s output power can vary in accordance with the loading changes.
Which reduce energy consumption and noise.The motor rotates at lower speed in holding pressure stage,and doesn’t work in cooling time.
1. The machine is in running condition, and can make products?
Sure, machine must be in running condition, and take machines back, can make goods directlry.
2. Is there any warranty?
Of course, within three months, machine is with problem. offer free components.
3. Is there any oversea service?
If keep our engineers safety abroad, engineer will go oversea to help clients deal with problems.
4. Don't know how to set the production parameter of the controller?
Will take video to show how to do it.
5. How to confirm the machine auxilaries?
We'lll advise every auxilary machine capacity based on machine capacity and the environment of clients' country
6. Other detail problem with machine and production.
Let's discuss further.
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Factory Address:No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China