|Place of Origin:||Shanghai, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Injection Weight:||649g||Injection Rate:||181g/s|
|Clamping Force:||2580kN||Opening Stroke:||540mm|
|Power(W):||22KW||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
TPR and PVC Sole Injection Moulding Machine GS258V
GSV SERIVES able to save 30%-50% electric power consumption base onVariable Pump.
|INJECTION UNIT||Screw Diameter||mm||50||55||60|
|Screw L/D Ratio||L/D||22||20||18.3|
|CLAMPING UNIT||Clamp Tonnage||KN||2500|
|Space Between Tie Bars||mm||580*580|
|Pump motor Power||KW||22|
|Oil Tank Capacity||L||555|
1) All computer control system
2) Super silence hydraulic circuit
3) High speed and high-pressure injection, ideal for high precisionand thin
walled molding products
4) Real-time injection process curve display
5) Enlarged clamping stroke to meet with larger stroke requirements
6) 4-stage of injection speed, 3-stage of holding pressure, 4-stageof
metering phase can be setup according to products' requirements
7) Optimal platen design, with toggle junction casting togetherwith platen
improves rigidity of mechanical system hence improves productdimensions
8) Screw and barrel are made of high quality new materials, whichextended
their working life
9) All hydraulic components and seals are offered by famousinternational
The GS-V plastic injection machine with variable pump series is thefine product of energy saving of Guangsu Company, which adopt theadvanced international control technology of variable pump. Theproduct adopts high response proportional variable system, makingthe output power of hydraulic system of plastic injection machinematching with the actual consumption, avoiding the loss of highpressure regulated flow and overflow. Compared to the machine withcommon constant flow pump, 30%50% electricity can be saved, showingobvious economic benefits.
In addition, the heat produced by the machine is low, reducingaround 30% cooling water consumption, reducing noise around themachine, extending the service life of hydraulic seals of oilcircuit and hydraulic oil, reducing greatly the use and maintenancecots of machine, at same time, the strict globalenvironment-friendly requirements are satisfied. The GS-V plasticinjection machine with variable pump series brings obvious economicbenefits to wide customers relying on its excellentperformance.
The GS-V plastic injection machine with variable pump series showsits excellent performance as below:
Energy saving 30-50%;
Quick response of system, short shaping period;
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service lifeof machine and mold;
Extend the service life of oil circuit system, reducing maintenancetimes, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; and high accuracy returnfilter is provided.
Provide whole drawing for the perform mould and bottle mould. Free charge for word design on the mould. We can help you install the machine; from setting machine, testing, and to check the machine is on the good working condition. There is a litter charge, only for flight charge and accommodation.
45 days upon deposit and approval to the bottle drawing.
For machine:50% T/T deposit within five days after the contract is signed against invoice of the seller. The balance of 50% will be paid before shipmment.
Shanghai GS(GuangSu) Machinery Manufacture Co.,Ltd
AddNo.888,Kungang Rd, Songjiang Sci.& Tech. Park,Shanghai,China
Tel +8621-5785 0702; 5785 0726; 5785 0727
Fax +8621-5785 0725
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Factory Address:No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China