|Place of Origin:||Shanghai, China (Mainland)|
|Minimum Order Quantity:||1 Set/Sets|
|Condition:||New||Injection Weight:||772 G|
|Injection Rate:||271g/s||Clamping Force:||2880KN|
|Variable Pump:||Energy Saving||Control System:||High Performance|
Full automatic plastic cup making machine
|Screw L/D Ratio||L/D||21.8||20||18.5|
|Theoretical Shot Size||cm3||712.7||848.2||995.5|
|Max. Screw Speed||rpm||160|
|Mold Opening Stroke||mm||590|
|Tie Bars Clearance||mm||630×630|
|Max. Mold Thickness||mm||630|
|Min. Mold Thickness||mm||230|
|Max. Pump Pressure||MPa||16|
|Pump Motor Power||kW||30|
|Oil Tank Volume||L||350|
- Control part:
1.It adopts imported advanced computer for plastic injection machine , with large screen, high definition crystal display and human-computer interface in various languages,such as Arabic, English, Spanish, Farsi, etc. Through CPU independent control and individual treatment, it has raised the running speed of the control system and alarming of successive oil temperature , thus warrants the operating speed of the machine.
2.Closed–loop temperature control system ensures the accuracy and reliability of the barrel temperature. Equiped with the functions of cold –proof boot, alarming and parameter memory for the molding, as well as password protection. The injection and switch are controlled by imported locating ruler.
- Injection part:
1.The excellent chrome , molybdenum and aluminum alloy screw and barrel have undergone the nitrilizing process, applicable to various plastic materials.
2.The injection cylinder(258T advanced) is parallel or balance for both sides of the barrel, so as to ensure the non-deviation of the nozzle, good sealing and non-leadage. It is equipped with double guide pillar supporting system which can inject under multifarious pressure at various speeds. It also uses one-stop hydraulic pre-injection device.
- Hydraulic part:
It adopts the imported top quality hydraulic components, proportional control for pressure and flow.
Mold is adjusted by gear controlled by oil motor , the mold can be adjusted automatically in accordance with the setting pressure , which is both convenient and reliable.
1. Act a good adviser and assistant of clients enable them to get rich and returns on their investments.
2. Select correct and suitable equipment model
3. Design and make products according to clients’ special requests
1. Reporting on machine situation from time to time.
2. Pre-check and accept products ahead of delivery
3. Drawing workshop layout 4. Train the first-line operators
1. Provide considerable services to minimize client’s worries.
2. Assist clients to prepare for the first construction schedule.
3. Install and debug the equipment
4. Examine the equipment
5. Take initiative to eliminate the troubles rapidly
6. Provide perfect service
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Factory Address:No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China