Home ProductsServo Motor Injection Molding Machine

Full Automatic Servo Motor Injection Molding Machine For Basket / Bucket / Planter

Full Automatic Servo Motor Injection Molding Machine For Basket / Bucket / Planter

Full Automatic Servo Motor Injection Molding Machine For Basket / Bucket / Planter

Product Details:

Place of Origin: Shanghai(China)
Brand Name: GS
Certification: CE IS09001
Model Number: GS608HS

Payment & Shipping Terms:

Minimum Order Quantity: 1Set
Price: Negotiable
Packaging Details: wooden case for shipping by sea
Payment Terms: L/C, T/T
Supply Ability: 1 set per month
Contact Now
Detailed Product Description
After-sales Service Provided: Engineers Available To Service Machinery Overseas Power: 16.9kw
Opening Stroke: 540mm Clamping Force: 2580KN
Injection Rate: 140~202g/s Injection Weight: 536~772g
Automatic: Yes Plastic Type: Thermosetting

Full Automatic Servo Motor Injection Molding Machine for Basket,Bucket,Planter

 

Technical parameters:

 

INJECTION UNIT  GS258 A B C D
Screw Diameter mm 80 85 90 100
Length/Diameter Ratio L/D 21.2 20 18 17.6
Theoretical Shot Volume cm3 2362 2667 2990 3691
Injection Weight(PS) g 2150 2427 2721 3359
Theoretical Injection Pressure Mpa 184 163 146 118
Injection Rate(PS) g/s 403 455 510 629
Plasticizing Capacity g/s 79 95 110 141
Maximum Screw Speed rpm 0-120
Injection Stroke mm 470
Clamping Unit    
Clamp Tonnage kN 6080
Toggle Stroke mm 900
Space Between Iie Bars (HxV) mm 880x880
Max. Mold Height mm 880
Min. Mold Height mm 350
Daylight Opening mm 1780
Ejector stroke mm 240
Ejector tonnage kN 158
Ejector Number piece 21
     
OTHERS    
System Pressure Mpa 16
Pump moter Power kW 30+30
Heater Power kW 44.3
Machine Dimension(LxWxH) m 8.81*2.27*2.45
Machine Weight t 23
Hopper Capacity Kg 100
Oil tank Capacity L 110
 
LUBRICATION SYSTEM

The following should be focused on when using the lubricating oil:


• For the selection of the lube oil and grease,please refer to the recommendation in the above chapter;
Store some lube oil for maintenance need,take care of storage:
a.The oil barrel oil should be properly sealed;Keep away from water;
b.Protect the oil containers from exposure to sundhine;
c.The storage temperature for the oil should not exceed 40

2017 90Ton China made plastic products making servo injection molding machine price

• Proper lubrication will lengthen the service life;on the contrary ,poor lubrication will result in the wear and heat of parts.The clamping unit of the machine employs auto central lubricating device,and the other necessary moving parts have grease nipples for lubrication.

Lubrication oil is an important factor of the machine.No operation without lubricating,otherwise the equipment will be seriously damaged.

SAFE SYSTEM
2017 90Ton China made plastic products making servo injection molding machine price

 

• The safety devices include safety door and locking-self mechanism.All safety doors are very important to avoid personal to damage by splashing melted material and prevent person from dangers zone.The locking-self mechanism will stop all damage action at any door opening.

• The safety door limit switch serves to interrupt the mold closing.When the safety door is open,limit switch has been activated to brek the circuit.Its dual circuit control functions of Normally closed and Normail open can stop the motion of the machine.

In case of any accident or error in the process of operation,first press the emergency stop button (the red projectied one on the lower right corner of the screen),and then turn off the main power supply switch.Find out the causes of fault and do not start the machine until all faults have been rectified.

Contact Details
shanghai Guangsu Manufacture Co.ltd

Contact Person: carry

Tel: +8617621724062

Send your inquiry directly to us (0 / 3000)

Contact

Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China

Factory Address:No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China